Chain Spray Premium
This chain spray combines the excellent lubricating characteristics of Boron Nitride and PTFE with the protective properties of a wax-based lubricant. It has excellent penetration capabilities, is resistant to fresh and salt water and protects the surface against corrosion. Furthermore the synthetic ceramic additives in this grease provide the best lubrication at extreme temperatures and pressure. It is therefore a high-grade lubricant that provides 1st class chain protection from abrasion and corrosion.
- Contains Boron Nitride and PTFE
- Reduces wear and friction
- Excellent thermal conductivity
- Extra additives to protect against corrosion
- Strong metal adhesion
- High penetrating power
- Water resistant, also from salt water
- Suitable for O-ring chains
- Resistant to high pressure
- Visible white lubricating film
Apply to protect or lubricate on all motorcycle and MTB parts subjected to high pressures, impacts and vibrations such as – but not limited to – (motorcycle)chains, gears, drive chains and cables. Also suitable for other applications where a corrosion protective wax-based grease with above properties is required.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking. Pressurized container: Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source. Avoid breathing spray. Wear protective gloves / eye protection. Use only outdoors or in a well ventilated area.
Aerosol with propane/butane propellant. Shake well before use.
After application, wait for several minutes until the solvents are evaporated. Then wipe off excessive lubricant. To be used whenever required.